|
|
Clarion DPX1000.2 Amp - Test Report
| Performance Testing | | Output power @ 1%THD, 1 kHz, 14.4 Volts: | | Stereo @ 4 ohm | 152.5 watts x 2 | | Stereo @ 2 ohm | 271.5 watts x 2 | | Stereo @ 1 ohm | 457.9 watts x 2 | | Bridged @ 4 ohms | 540.0 watts x 1 | | Bridged @ 2 ohms | 910.5 watts x 1 | | Output power @ 1%THD, 1 kHz, 12.5 Volts: | | Stereo @ 4 ohm | 146.4 watts x 2 | | Stereo @ 2 ohm | 266.8 watts x 2 | | Stereo @ 1 ohm | 441.0 watts x 2 | | Bridged @ 4 ohms | 532.2 watts x 1 | | Bridged @ 2 ohms | 880.1 watts x 1 | | Amplifier would not make rated power with | | reasonable levels of THD+N. | | Input Sensitivity: | Min gain | 17.84 dB | | Max gain | 38.79 dB | | Frequency Response: Fig (1) | | 10 Hz - 26 kHz, 2 ohm load | | Signal to Noise Ratio: | -92 dB | | Damping Factor: | | 68 | 10Vrms out at 1 kHz, 4 ohms. | | Idle current: 2 amps | | Crossover Filter responses shown in Fig (2). | | Bass Equalization curve shown in Fig (3). | | Remote Level Control range: | | 0 dB to - 9.43 dB (attenuation) |
|
|