 The concept cars were sprayed...  The concept cars were sprayed with a flexible 2K primer. |  The door panels were sprayed...  The door panels were sprayed with polyester primer in light coats and allowed to dry. |  The car bodies were sprayed...  The car bodies were sprayed with SEM guidecoat and wet-sanded with 220-grit sandpaper. |
 The door panels were sprayed...  The door panels were sprayed with 10 basecoats of paint to create the custom silver color. |  The door panels were clearcoated...  The door panels were clearcoated five times and sanded down in preparation for graphics. |  One-eighth-inch fine-line...  One-eighth-inch fine-line masking tape was used to create panel lines on the door panel. |
 Neon candy graphics were sprayed...  Neon candy graphics were sprayed on the panels. |  Panels, shading, and other...  Panels, shading, and other details were sprayed onto the concept car bodies. |  The tweeter rail was painted...  The tweeter rail was painted with silver basecoat and set into place. |
 Ten additional coats of clearcoat...  Ten additional coats of clearcoat were sprayed onto the door panels to produce the final finish. |  Shown here, the completed...  Shown here, the completed door panel with the concept car installed and the 3-D tweeter rail floating above the door panel. | |