Car Audio and Electronics Homepage Car Audio and Electronics

Door Panel Speaker Installation Cut Excess Material

Door Panel Speaker Installation Cut Excess Material
Door Panel Speaker Installation - Part 2 - Car Audio and Electronics Magazine
With a jigsaw, cut off the excess material around the rings, leaving 1/8" of material behind. View Related Article
Door Panel Speaker Installation Mounting Ring Door Panel Speaker Installation Cut Excess Material Door Panel Speaker Installation Attach The Template Door Panel Speaker Installation Remove Material Door Panel Speaker Installation Apply Duraglas Door Panel Speaker Installation Trace Speaker Ring Door Panel Speaker Installation Clamp The Aluminum
Door Panel Speaker Installation Trim The Excess Door Panel Speaker Installation Use A Chamfer Bit Door Panel Speaker Installation Use Ca Glue Door Panel Speaker Installation Apply Duraglas Door Panel Speaker Installation Hand Sand The Surface Door Panel Speaker Installation Drill And Recess Bolts Door Panel Speaker Installation Mold The Inserts
Door Panel Speaker Installation Tape Off The Top Of Inserts Door Panel Speaker Installation Remove Masking Tape Door Panel Speaker Installation Door Panel Speaker Installation Perfect Blend Door Panel Speaker Installation Apply Polyester Primer Door Panel Speaker Installation Ready For Paint Door Panel Speaker Installation Apply Primer
Door Panel Speaker Installation Sand The Aluminum Ring Door Panel Speaker Installation Aply Blue Compound Door Panel Speaker Installation Spray Primer Door Panel Speaker Installation Spray Door Panel Speaker Installation Clean Door Panel Door Panel Speaker Installation