 The built-up section of the...  The built-up section of the tub is for the four-channel amp, raising it off the floor for a floating effect. They also added some straps to mount the crossovers. |  The Xstatic power pack module,...  The Xstatic power pack module, wiring components, and crossovers were installed in the tub. |  Then the four-channel. It's...  Then the four-channel. It's starting to take shape. |
 The Ultrasuede cover was then...  The Ultrasuede cover was then added to finish off the amp tub. |  Metal tubing was bent by a...  Metal tubing was bent by a local muffler shop to Performance Audio's specifications. The stands were painted with the same hammer-tone paint used on the tub. |  The final step was installing...  The final step was installing the floating amp stands. To mount the sub amps, the bottom plate of each had to be removed. Each plate was drilled and bolted to the mounting base of the stand; then the amps were reassembled. |