How-to: Building The Subwoofer Enclosure/Amprack Cont.
 The enclosure and amplifier...  The enclosure and amplifier mounting plate is covered in black vinyl while the shroud is primered and sanded again for painting. |  The enclosure is mounted in...  The enclosure is mounted in the car and woofers are installed. The last step is painting the shroud silver to match the Mercedes' exterior. | |
Modifying The Door Panels
 MDF rings are formed to create...  MDF rings are formed to create a seal between the Morel speakers and the air space in the Mercedes door panel. |  Sticks are used to temporarily...  Sticks are used to temporarily secure the rings to ensure a precise alignment with the respect to the door panel. |  The panel piece is removed...  The panel piece is removed from the door panel with the rings still aligned precisely by the sticks. |
 The rings are cut and ground...  The rings are cut and ground to fit the door panel. The panel is then reinforced with Marglass and ABS. Felt added between the woofer mount and door panel ring eliminates any vibrations. |  The door panel is final test-fitted...  The door panel is final test-fitted just before vinyl is added. The door panels will also be screwed to the metal doorframe at the bottom to ensure a secure fit. |  A speaker grille is stapled...  A speaker grille is stapled to the door panel. Dynamat was also applied to the panel to eliminate any resonances. |
 Custom MDF mounts are built...  Custom MDF mounts are built for all the door woofers and are bolted to the door metal. The doors are deadened with Dynamat both inside and out. |  With the speaker secured and...  With the speaker secured and door deadened, the door panel is ready to mount. |  The door panel is wrapped...  The door panel is wrapped in vinyl and mounted. The added Morel logo provides a finished look. |