Car Audio and Electronics Homepage Car Audio and Electronics

0305cae Corner14 Z

The last step was to make the steering work. We cut the stock steering rod in half between the U-joints, then extended it 18 inches with a tubular steel section. The ends were welded on each side of the tube and the pedal assembly was clearanced to allow the rod to pass through.
Competition Corner - May 2003

 The last step was to make the steering work. We cut the stock steering rod in half between the U-joints, then extended it 18 inches with a tubular steel section. The ends were welded on each side of the tube and the pedal assembly was clearanced to allow the rod to pass through.  View Related Article